Finishing the top surface

Pun intended…

I did not do any work on the bench during the past week but with the weekend here I am able to spend a bit of time at it. Yesterday I finished to banding around the top by filling the screw holes with plugs. I made the plugs with the laser cutter (these things are handy to have around!). They were pressed in place and sanded smooth.

I added a shelf under one side of the bench as well. This completes all the heavy construction of the bench, its now finally ready for a finish. I decided to simply varnish all the surfaces with a clear water based Varathane.

Read More »

About the Author:

I'm your host, Tim Warris, a product developer in Port Dover, Ontario. Since March of 2007 I have been documenting the construction of the former CNJ Bronx Terminal in HO scale. For my day job, I design track building tools for Fast Tracks, a small company I own and operate. Fast Tracks makes it fast and easy to hand lay your own trackwork. Stop by our website to learn more!

Posted by: Tim | 12-02-2007 | 11:12 AM
Posted in: Latest Posts | Work Bench | Comments (2)

Completing the Top

Trimming and banding.

Once the laminate (Masonite) was adhered to the top it needed to be trimmed flush with the edges of the plywood. A laminate trimmer makes short, but dusty work of this.

all these images are clickable for a larger version….

Read More »

About the Author:

I'm your host, Tim Warris, a product developer in Port Dover, Ontario. Since March of 2007 I have been documenting the construction of the former CNJ Bronx Terminal in HO scale. For my day job, I design track building tools for Fast Tracks, a small company I own and operate. Fast Tracks makes it fast and easy to hand lay your own trackwork. Stop by our website to learn more!

Posted by: Tim | 11-25-2007 | 11:11 PM
Posted in: Latest Posts | Work Bench | Comments (2)

Drawers and Top

Workbench continued….

Under the hand tool drawer I like to keep all the various chemicals I use when building models. I had this arrangement in the last bench and it seemed to work very well. I am going to add two drawers here.

Read More »

About the Author:

I'm your host, Tim Warris, a product developer in Port Dover, Ontario. Since March of 2007 I have been documenting the construction of the former CNJ Bronx Terminal in HO scale. For my day job, I design track building tools for Fast Tracks, a small company I own and operate. Fast Tracks makes it fast and easy to hand lay your own trackwork. Stop by our website to learn more!

Posted by: Tim | 11-24-2007 | 12:11 AM
Posted in: Latest Posts | Work Bench | Comments (4)